08-26-2016, 01:11 PM
Hi
I doing a post processing with retime with a value of 0.07 enabled on an existing simulation.
As I am still doing the testing, I kept the gird spacing at default 1.
But while reading the post cache, there is stutter in first 150 frames for every 20 frames or so.
Any ideas on how i could reduce this.
I doing a post processing with retime with a value of 0.07 enabled on an existing simulation.
As I am still doing the testing, I kept the gird spacing at default 1.
But while reading the post cache, there is stutter in first 150 frames for every 20 frames or so.
Any ideas on how i could reduce this.