Sitni Sati Forums
Wrong emission - Printable Version

+- Sitni Sati Forums (
+-- Forum: Products (
+--- Forum: FumeFX [C4D] (
+--- Thread: Wrong emission (/showthread.php?tid=1995)

Wrong emission - Lothar1952 - 08-13-2019

Made an ignition setup which works fine and as expected as far as ignition and spread out is concerned, however there is a not wanted emission from world 0.0.0 for the first 35 frames here I can´t explain. I set a kill modifier in case it is some wired stuff from Thinking or Xparticles, however, it doesn´t seem to be as it dies off after frame 35 - but before igniting platonic dies off as planned so no idea why there is that erratic emission... ... 8.mp4?dl=0


p.s. sorry, xparticles is needed - I don´t know how to do this with pure TP ...

edit - looks like the erratic emission is present as long as the dynamic platonic is not yet on the floor. Tried to bake and resim, same result. Might be a problem with dynamic objects ....

edit 2 - looks like it is a TP or xp problem. I lifted everything up and see now there is a single TP generated for the first frames at 0.0.0 so not your job I´m afraid Wink

Re: Wrong emission - Lothar1952 - 08-13-2019

here´s the rendered version lifted up so the erratic tp is outside container ... everything as expected ... 9.mp4?dl=0

investigating the XP part now. Should be able to do the same with pure xp ....

edit : this erratic TP is created by Xparticles or Thinking particles, however having similar setup, Xparticles does not recognize this erratic particle and does not sent out fuel from it ...