Quick test with Max, Vehicle Studio Plug-in and FumeFX

[ddustin]

Here is an example we have been working on to test the FumeFX plugin.
http://www.dustinproductions.com/max-re ... -25-07.mov
This was the 2nd day we have had the FumeFX plugin.

The file is 5.5 Mb

The vehicle is using Vehicle Studio 1.7 (http://www.newplugins.com/) for the dynamics.

thanks,
david

[Rif]

hehe big grid hein its a good start !

[sitnisati]

Looks like it's a very, very big grid
Not bad for a start at all.

Kresimir

[milwatt]

Interesting...
Can you post an high res image of your smoke ? So wee can better see the smoke...

Thx

[Woody79]

looking good. heres tip for sand/dirt. i have increased the jitter to 100% to make sure its really grainy, makes the smoke looks more like lots or particles this way. 8)

[Guest]

Woody,

I tried changing the jitter and it had no effect at all.

david

[ddustin]

Looks like you show up as a guest when you time out...........

That was my post to Woody.

david

[Woody79]

weird...works here. you might need a light tho. you can also put noise in your fluid mapping map. i.e have a fractel noise clamped at .5 and .7, then in the black/white channel of this you can put a smaller noise map to add more grain detail.

ill check my sand settings....

yep ,that was it, 100% jitter on render/illumination, then a fine noise map. mine was at about 0.4, which is small.. with a high voxel grid, this takes care of the detail, otherwise you can have two maps as said above.