+- Sitni Sati Forums (https://forum.afterworks.com)
+-- Forum: Products (https://forum.afterworks.com/forumdisplay.php?fid=4)
+--- Forum: DreamScape (https://forum.afterworks.com/forumdisplay.php?fid=11)
+--- Thread: More detail into Seascape surface (/showthread.php?tid=36)
More detail into Seascape surface - duckyamuck - 08-11-2005
I need to get more detail into the water surface. I have plenty of chop and my grid detail is maxed at 10 and the grid spacing is minned at .1. I have a Seascape Bump in the material, and that is capped at 1.0. But, still there is not enough detail.
I'm thinking that either a) I have to scale my scene and camera up around the sea, or b) scale down the sea within my scene.
Is there a global scale feature (kinda like there is in Afterburn)? If I try and use an XForm modifier, I get the same assertion failure that I get when applying a wave modifier.
Any thought and suggestions?
Thanks
T
- sitnisati - 09-09-2005
Hi Todd,
Can you send us an image or maybe a zip file so we can take a look what could be the problem?
Thank you.
Kresimir