+- Sitni Sati Forums (https://forum.afterworks.com)
+-- Forum: Products (https://forum.afterworks.com/forumdisplay.php?fid=4)
+--- Forum: FumeFX [max] (https://forum.afterworks.com/forumdisplay.php?fid=8)
+--- Thread: Fumefx Partitioner (/showthread.php?tid=2184)
Fumefx Partitioner - godwin - 10-25-2024
Hi,
Do we have a partitioner in case of fumefx container having a huge length. there was a script from scriptspot which i used to use it earlier on previous versions of 3dsmax for fumefx partioning, which dont work currently. Or is there any other approach.
RE: Fumefx Partitioner - Kresimir Tkalcec - 10-25-2024
Hello,
There are no other scripts that will do partitioning as I am aware of.
Do you have long irregular path so you want to split simulations?
RE: Fumefx Partitioner - godwin - 10-29-2024
(10-25-2024, 03:02 PM)Kresimir Tkalcec Wrote: Hello,Hi Kresimir,
There are no other scripts that will do partitioning as I am aware of.
Do you have long irregular path so you want to split simulations?
Thanks for the response. I had simulated with just the basic setup.
Do you have long irregular path so you want to split simulations?
Well i had a straight path with truck moving through the camera , kicking the dust from the tyre. tried to use nesting, but since it was one straight path, i skipped it. It worked with just the increased length, though it took time. added the velocities in channel, incase asked for higher details through WT.
RE: Fumefx Partitioner - Kresimir Tkalcec - 10-29-2024
Hello,
If you have a long trail and camera is moving as well, then you can animate the FumeFX grid movement as well and use the "Use Grid Motion" option (https://docs.afterworks.com/FumeFX6max/Simulation_1.htm).
This would shift the grid content in the direction of the grid movement keeping the grid minimum as needed.
RE: Fumefx Partitioner - godwin - 10-30-2024
(10-29-2024, 10:33 AM)Kresimir Tkalcec Wrote: Hello,Thanks for the suggestion. will look into this option as well.
If you have a long trail and camera is moving as well, then you can animate the FumeFX grid movement as well and use the "Use Grid Motion" option (https://docs.afterworks.com/FumeFX6max/Simulation_1.htm).
This would shift the grid content in the direction of the grid movement keeping the grid minimum as needed.