Sitni Sati Forums
FumeFX 5.0 beta 1 - Printable Version

+- Sitni Sati Forums (https://forum.afterworks.com)
+-- Forum: Products (https://forum.afterworks.com/forumdisplay.php?fid=4)
+--- Forum: FumeFX [C4D] (https://forum.afterworks.com/forumdisplay.php?fid=10)
+--- Thread: FumeFX 5.0 beta 1 (/showthread.php?tid=1902)

Pages: 1 2

FumeFX 5.0 beta 1 - sitnisati - 06-17-2019

Welcome to the FumeFX 5.0 for Cinema 4D beta progam.

FumeFX 5.0 beta has no restrictions or limitations, however the license is limited to 30 days.
If beta will run for more than 30 days, we will extend license only to active beta testers.

Beta installers for Cinema 4D 18,19 and 20 (Windows) can be downloaded from: http://bit.ly/2XhBbW8

Please make sure that you point installer to the Cinema 4D install folder so that plugins will be placed to correct location.

When you submit a bug report please include:
- Cinema 4D version
- Windows version
- Processor type
- Graphic card model and driver version
- C4D scene
- steps to reproduce

We're looking forward to receive bug reports, feature requests and to see the work you'll create with FumeFX.
Feel free to share your work on the web, but we would be thankful if you can share it here as well.

Feel free create a new post for each of the issues you find.

Best regards,
Kresimir Tkalcec

Re: FumeFX 5.0 beta 1 - vrauckis - 06-17-2019

Thank you for this beta. I am finding that the simulations (from the tutorials) are very quick and render nicely.

Vytas Rauckis.

Re: FumeFX 5.0 beta 1 - sitnisati - 06-17-2019

vrauckis Wrote:Thank you for this beta. I am finding that the simulations (from the tutorials) are very quick and render nicely.

Vytas Rauckis.

Thank you for the feedback!

Re: FumeFX 5.0 beta 1 - Pixonoid - 06-17-2019

Thanks for the Beta Access Smile

Crash

Trying to enable GPU viewport -> Crash

Message in error log:
[object_impl.cpp(4477)]
[18:27:35] CRITICAL: Stop [baseobject.h(298)]

Windows
Version 10.0.18362 Build 18362

Cinema
R20.059

Prozessor
i7 4790K Devils Canyon

GPU
EVGA 2080 TI FTW3 @ 430.86

Szene
every scene Smile

Reproduce
enable viewport GPU preview

Re: FumeFX 5.0 beta 1 - sitnisati - 06-17-2019

Pixonoid Wrote:Thanks for the Beta Access Smile

Crash

Trying to enable GPU viewport -> Crash


You're welcome and thank you for the bug report.

One thing to note - make sure that you have Hardware OpenGL enabled in Cinema 4D.

https://help.maxon.net/us/#PREFSOPENGL- ... MAIN_GROUP

Re: FumeFX 5.0 beta 1 - neon13 - 06-17-2019

Low values of "Maximum Deapth" under the tab
of Multiple Scattering, like 1 or 2 , crash C4D instantly,
even without starting the simulation.

Windows:
Version 10.0.18362 Build 18362

Cinema4D Version:
R19.068

CPU:
AMD Threadripper 1950x

GPU:
Gigabyte Gtx 1080ti

GPU Version:
25.21.14.1917

Re: FumeFX 5.0 beta 1 - EH_FXTD - 06-17-2019

Thank you for allowing me to try Fumefx for c4d beta!

Re: FumeFX 5.0 beta 1 - finmeteor - 06-17-2019

HI~

Thank you for allowing me to try Fumefx for c4d beta!

windows：Version 7.0 service pack 1
RAM：32G
Gpu：Colorful GTX10700
Cpu：I7 4770K

I am try it the plugins two hours ago...so when I used the arnold 5.3.0，it can‘t get the right render result..

This img rrender is use by standard render.
[Image: d9a43b140eef4511.png]

I change the shader to Arnold volume，Create Arnold volume shader and name change ：Smoke /Smoke/Fire
but it couldn't get work ，that I cache the sim again，but it isn't work right too..

[Image: c543acc751c0a461.png]
http://test.imgurl.org/imgs/2019/06/c543acc751c0a461.png

[Image: d70e3b611abb6b31.png]
http://test.imgurl.org/imgs/2019/06/d70e3b611abb6b31.png

[Image: 153ada001e77977b.png]
http://test.imgurl.org/imgs/2019/06/153ada001e77977b.png

It isn't support in Arnold 5.3.0 ？
Or I was made the wrong shader to this sim？

Re: FumeFX 5.0 beta 1 - sitnisati - 06-17-2019

neon13 Wrote:Low values of "Maximum Deapth" under the tab
of Multiple Scattering, like 1 or 2 , crash C4D instantly,
even without starting the simulation.

Thank you for the report.

Re: FumeFX 5.0 beta 1 - sitnisati - 06-17-2019

Hello,

Feel free to create new posts with bugs description for easier navigation.

Thank you!

Re: FumeFX 5.0 beta 1 - sitnisati - 06-17-2019

finmeteor Wrote:HI~

Thank you for allowing me to try Fumefx for c4d beta!


You're welcome!

Have you checked this help page?
http://docs.afterworks.com/FumeFX5C4D/F ... Shader.htm

Could you please include a scene file?

Thank you.

Re: FumeFX 5.0 beta 1 - RenixVFX - 06-18-2019

Hey just tried the scene in the youtube video with sphere , when i simulate the source just flickers

windows 10
c4d r20.059

i9 9900k
gtx1080

Re: FumeFX 5.0 beta 1 - Jaron - 06-18-2019

Issue

Turning on interactive viewport in the scene will sometimes render the fire green or blue or bright yellow, to fix I would just drag the frame slider around.

Placing a light in the scene with interactive viewport on, attaching it to the FumeFX container, then turning on area shadows will make C4D hang for a good 30 seconds, and is very very slow to make any changes afterwards.
Also (not really an issue), but lights will come in at full intensity, and just blow out the smoke. Maybe its more my scene scale thats the issue though.

Windows
Windows 10 v1809 build 17763.503

Cinema
R20.059

Processor
AMD Ryzen Threadripper 1950X

GPU
Geforce GTX 1080 TI w\ 430.86

Scene
See attached.

Reproduce
First issue, just place on the interactive viewport and toggle on fire in the rendering option.
Second issue, place a light in the scene (for me I placed a spotlight), and turn on area shadows with interactive viewport enabled.

Re: FumeFX 5.0 beta 1 - sitnisati - 06-18-2019

finmeteor Wrote:HI~

Thank you for allowing me to try Fumefx for c4d beta!


Hello,

Please check the topic:
viewtopic.php?f=18&t=1990

With those changes, your scene will render here properly.

Regards,

Kresimir Tkalcec

Re: FumeFX 5.0 beta 1 - kuroda - 06-18-2019

Hello,

Crash

Trying to enable GPU viewport (ONLY)

CINEMA4D R20.059( RB272827)

OS: Windows 10 Pro (1803 Build 17134.829)

CPU: Intel® Core™ i9-7900X CPU @ 3.30GHz

GPU: GeForce GTX 1070/PCIe/SSE2; GL 4.6.0 NVIDIA 419.67

every scene

I want to try "GPU viewport".
Thank you.

Re: FumeFX 5.0 beta 1 - Jaron - 06-18-2019

I've uploaded a video of me trying to get FumeFX to render with Arnold. I also come across and error when switching from Arnold to Standard Fume whilst still using the Arnold renderer and trying to do a viewport render.
(I don't own Arnold, so I'm just testing it about, hence the watermarks).

https://streamable.com/u4u29

Re: FumeFX 5.0 beta 1 - EFEXgmbh - 06-19-2019

Hello,

The installer did not take the right path for the plugin Installation and had to manually drag and drop the files.
Therefore it think it would be less confusing if there would be just a plugin for download as most of the third party software installtion operate.

Also could not connect on my home office computer with the same serial as I don't always from the same place. So I wonder how I could keep on working with one serial number but from different work station?


Best,
Thomas

Simulation Window - hamidhajji - 06-19-2019

Hi !
The simulation window won't remember the 2 options "Hold Open" and "End Beep", it always default to "Hold Open"


[Image: Sim-Windows.png]

Re: FumeFX 5.0 beta 1 - Tapple - 06-20-2019

Thanks for this beta, I will use 4d R20 cinema on dual E Xeon 2683 2.10 GHz and Nvidia M6000 24 GB graphics card

Re: FumeFX 5.0 beta 1 - GeordiePigeonOwner - 06-21-2019

Where is the serial number you have to put in on authorization?

Am I missing something?