+- Sitni Sati Forums (https://forum.afterworks.com)
+-- Forum: Products (https://forum.afterworks.com/forumdisplay.php?fid=4)
+--- Forum: FumeFX [maya] (https://forum.afterworks.com/forumdisplay.php?fid=19)
+--- Thread: Effector simulation steps bug? (/showthread.php?tid=1583)
Effector simulation steps bug? - petkovic - 12-06-2014
Hi everyone,
im not sure is it a bug or its not working the way i think...
So i have a simple scene ball breaking the wall, and i have effector that 'reads' the wall pieces velocity and multiply the fuel amount, etc...
but, when i change the simulation steps from 1 -> 2 or 3 there is no more emission from these wall pieces???
could anyone gimme some hints, i can share a scene...
best regards
cheers
Re: Effector simulation steps bug? - sitnisati - 12-11-2014
Hello,
Thank you for the report - we will take a look into this and get back to you.
A very simple scene for issue repro would help too.
Thank you.
Regards,
Kresimir Tkalcec
Re: Effector simulation steps bug? - petkovic - 12-17-2014
Sorry for delay, i was away these days
here is an sample scene, thx
cheers
Re: Effector simulation steps bug? - petkovic - 12-17-2014
i have just tried again, and looks like its working, im sure it didnt work
1st time when i test it....p.s
i got it doesnt work ->
spacing: 0.1 (by default in this scene is 0.2)
Re: Effector simulation steps bug? - sitnisati - 12-22-2014
Hello,
Thank you for the scene and tips.
It seems that if you remove pSphere1_collision everything will be okay.
At this point but sure why this happens so will have to look into it.
Regards,
Kresimir Tkalcec
Re: Effector simulation steps bug? - petkovic - 12-22-2014
Hi Kresimir,
thx for your time, and thx for finding out what was the problem with this scene...
happy holidays btw
cheers
Re: Effector simulation steps bug? - sitnisati - 12-22-2014
You're welcome and I'm glad it helped.
Thank you. Happy holidays as well !
Kresimir Tkalcec