+- Sitni Sati Forums (https://forum.afterworks.com)
+-- Forum: Products (https://forum.afterworks.com/forumdisplay.php?fid=4)
+--- Forum: AfterBurn (https://forum.afterworks.com/forumdisplay.php?fid=9)
+--- Thread: AB4 and TP3 - transfer particle rotation (/showthread.php?tid=662)
AB4 and TP3 - transfer particle rotation - Filip Kaczorek - 08-04-2008
Can TP transfer particle rotation (or scale) to AB?
Like through AB operator in PFlow?
Re: AB4 and TP3 - transfer particle rotation - joescarr - 08-05-2008
NO, it cannot. This is a HUGE limitation when working with Afterburn & TP -- no orientation and no spin. P_y_r_o_cluster has a simple switch to enable "Use Orientation" -- I know there's a little math but this should be easy for Sitni, and it would be a million times easier than us trying to convert three alignment vectors into euler rotations...
I sincerely hope they can address this very, very soon.
For scale, same thing -- P_y_r_o has a switch, but ABurn has no switch. You can store the particle scale to a data channel in TP, and this works. Doing this for rotation sucks immensely.
Sitni.... please, please, please enable Orientation and Scale support for TP...
thanks!
Re: AB4 and TP3 - transfer particle rotation - sitnisati - 08-07-2008
Hi guys,
This is added to the wishlist. I know that current procedure is a pain, and
we'll try to make it simple.
Thanks
Kresimir
Re: AB4 and TP3 - transfer particle rotation - Filip Kaczorek - 08-07-2008
woohooo
bounce sigi bounce sigi bounce sigi bounce
))
Re: AB4 and TP3 - transfer particle rotation - joescarr - 08-07-2008
thanks, Kresimir, this would be a HUGE help, thanks